SCVMM HTTP 500 error reports started piling up after Patch Tuesday in October 2026. A VM template deployment that worked the week before now stops at the content copy step, the BITS transfer from the library server to the Hyper-V host never finishes, and the job fails with HTTP 500. Microsoft confirmed on November 3, 2026 that the October Windows Server security updates cause it. The good news: you do not have to uninstall the security update. This guide shows how to confirm the problem, apply Microsoft’s Known Issue Rollback workaround, and verify that deployments work again.
What Microsoft Confirmed About the SCVMM HTTP 500 Error
The System Center team published “Windows Server October 2026 monthly security updates impact SCVMM environments” on the System Center Blog. It describes two separate known issues that appear after Hyper-V hosts receive the October 2026 cumulative updates:
- Issue 1, BITS transfers: content-transfer workflows such as VM deployment from VM templates that use BITS fail with an HTTP 500 error. This affects SCVMM 2025, 2022 and 2019.
- Issue 2, AMD hosts only: host and cluster refresh fails with a UInt64-to-Int64 OverflowException, so AMD-based hosts and clusters cannot be managed reliably.
The trigger is the SCVMM October 2026 update cycle on the Windows side, not a VMM update. Microsoft names these packages:
Microsoft also states that hosts without the October 2026 patches are not affected. A permanent fix is in progress and will ship on top of the latest update rollups: UR1 for SCVMM 2025 and UR4 for SCVMM 2022.
Symptoms: VM Template Deployment Fails With HTTP 500
In practice the SCVMM HTTP 500 error looks like this:
- A VM template deployment fails during the step that copies the VHDX from the library share to the destination host.
- The VMM job reports a BITS failure with HTTP 500 instead of the usual access-denied or network errors.
- BITS jobs on the host or VMM server sit in a
Suspendedstate with little or no data transferred. - Other library operations that move content with BITS, such as adding default resources, can fail the same way. One administrator in the blog comments reported error 24374 during “Add Default Resources” with the BITS job suspended at zero bytes. That is a community report, not Microsoft guidance, but it fits the same pattern.
- Everything started right after the October 13, 2026 security updates were installed on hosts, the VMM server or the library server.
If the VM template deployment fails right after patching and VMM itself was not changed, assume the SCVMM HTTP 500 error before you start rebuilding library shares or certificates.

Step 1: Confirm the SCVMM HTTP 500 Error
First, check which machines have the October update. Run this from an elevated PowerShell session and replace the names with your hosts, VMM server and library server:
Get-HotFix -ComputerName HV01, HV02, VMM01, VMMLIB01 |
Where-Object HotFixID -in 'KB5126646', 'KB5126655', 'KB5126651' |
Select-Object Source, HotFixID, InstalledOnCode language: JavaScript (javascript)Next, look at the failed VMM jobs. On the VMM server, in a VMM PowerShell session:
Get-SCJob -All | Where-Object Status -eq 'Failed' |
Select-Object -First 10 Name, StartTime, ErrorInfoCode language: JavaScript (javascript)Then list the BITS jobs on the destination host. The -AllUsers switch requires an elevated session:
Get-BitsTransfer -AllUsers | Select-Object DisplayName, OwnerAccount, JobState, BytesTransferred, BytesTotalCode language: JavaScript (javascript)Finally, note your VMM version, because the workaround requires a specific update rollup:
Get-SCVMMServer -ComputerName VMM01 | Select-Object Name, ProductVersionCode language: JavaScript (javascript)October update on the involved machines, failed BITS-based jobs and suspended transfers together confirm the SCVMM HTTP 500 error.
Why the SCVMM HTTP 500 Error Happens
Microsoft’s post does not publish a detailed root cause. It says only that the October 2026 Windows Server updates contain a change that breaks BITS-based content transfer in SCVMM-managed environments. That is why Microsoft is shipping a Known Issue Rollback (KIR): a KIR turns off one specific change from a cumulative update and leaves the rest of the security fixes in place. Uninstalling KB5126655 or its siblings would also make the SCVMM HTTP 500 error disappear, but it removes every October security fix, so it is the worse trade-off.
Step 2: Update SCVMM to UR1 or UR4
Microsoft’s workaround starts on the VMM side. Before applying the rollback, update SCVMM 2025 to Update Rollup 1 and SCVMM 2022 to Update Rollup 4. Those are also the baselines the permanent fix will be built on, so you will need them anyway. Check the VMM release notes for the rollup prerequisites and install order for your version.
SCVMM 2019 has no matching rollup requirement in the post. Apply the Known Issue Rollback on 2019 environments and watch the System Center Blog for the permanent fix.
Step 3: Fix the SCVMM HTTP 500 Error With Known Issue Rollback
Microsoft published one Known Issue Rollback MSI per Windows Server version. Download the one that matches the operating system of each machine:
- Windows Server 2025 KB5126646 Known Issue Rollback MSI
- Windows Server 2022 KB5126655 Known Issue Rollback MSI
- Windows 10 1809 and Windows Server 2019 KB5126651 Known Issue Rollback MSI
Install the MSI on all affected Hyper-V hosts, the SCVMM server and the SCVMM library server. The library server matters because it is the BITS source for template content. You can run the installer silently:
msiexec /i "C:\Install\Windows Server 2022 KB5126655 261030_13021 Known Issue Rollback.msi" /qn /norestartCode language: JavaScript (javascript)The MSI only adds a Group Policy template. It does nothing until you configure the policy:
- Open the Local Group Policy Editor (
gpedit.msc). - Go to Local Computer Policy > Computer Configuration > Administrative Templates > the node named after the MSI you installed > Windows Server 2025, 2022 or 2019.
- Open the policy. Its default state is Not Configured.
- Set it to Disabled and select OK. For a KIR policy, Disabled means the problematic change is turned off.
- Run
gpupdate /syncfrom an elevated command prompt. - Restart the machine.
The restart is not optional. gpupdate /sync makes the next policy application run synchronously, which happens during the reboot. Restart hosts one at a time, live-migrating workloads first, rather than patching a whole production cluster in one pass.
In larger environments you do not have to touch every server by hand. Microsoft’s Known Issue Rollback Group Policy article explains how to deploy the same policy through domain Group Policy, and a WMI filter can target only the Windows Server version the MSI is built for.

Clear stuck BITS jobs after the restart
Transfers that were already suspended do not always recover on their own. After the restart, check for suspended jobs and remove them so VMM can start a clean transfer:
Get-BitsTransfer -AllUsers | Where-Object JobState -eq 'Suspended' | Remove-BitsTransferCode language: JavaScript (javascript)Only remove jobs you can identify as failed VMM transfers. Other software also uses BITS, so review the list from Step 1 before you pipe it into Remove-BitsTransfer.
AMD Hosts: Fix the Refresh OverflowException
The second issue is unrelated to the SCVMM HTTP 500 error, but it arrives with the same October updates, so check for it if your hosts use AMD processors. On SCVMM 2025 UR1 or SCVMM 2022 UR4, Microsoft provides a hotfix that replaces ImgLibEngine.dll on the VMM server: 2025UR1_HF.exe and 2022UR4_HF.exe.
- Back up the existing
ImgLibEngine.dllfrom thebinfolder of the VMM installation. - Run the hotfix package to extract the new DLL.
- Stop the System Center Virtual Machine Manager service.
- Replace
ImgLibEngine.dllin thebinfolder with the extracted file. - Start the service and refresh an AMD host to confirm the exception is gone.
$bin = "C:\Program Files\Microsoft System Center\Virtual Machine Manager\bin" # adjust to your install path
Copy-Item "$bin\ImgLibEngine.dll" "$bin\ImgLibEngine.dll.bak-$(Get-Date -f yyyyMMdd)"
Get-Service -DisplayName "System Center Virtual Machine Manager" | Stop-Service
# copy the extracted ImgLibEngine.dll into $bin, then:
Get-Service -DisplayName "System Center Virtual Machine Manager" | Start-ServiceCode language: PHP (php)Microsoft says the SCVMM 2019 hotfix for this issue will be published after the permanent fix for the BITS issue.
Step 4: Verify the SCVMM HTTP 500 Error Is Fixed
Confirm the policy applied on each machine where you installed the MSI. The HTML report lists the Known Issue Rollback policy and its Disabled state:
gpresult /h C:\Temp\gp-$env:COMPUTERNAME.html /scope computerCode language: PHP (php)Then run a test VM template deployment to a host that failed before, and watch the transfer and the job:
Get-BitsTransfer -AllUsers | Select-Object DisplayName, JobState, BytesTransferred, BytesTotal
Get-SCJob -All | Select-Object -First 5 Name, Status, Progress, ErrorInfoCode language: JavaScript (javascript)A working environment shows the BITS job moving to Transferring and then disappearing once complete, and the VMM job ends with Completed. If one host still fails, check that the MSI and the Disabled policy are present on that host, the VMM server and the library server, and that each one was restarted.

Prevent the Next SCVMM Deployment Break
- Keep a small pilot ring: one Hyper-V host, a test library share and a test template. Patch it a week ahead of production and run a template deployment after every update.
- Read the “Known issues” section of each Windows Server KB before you approve the update in WSUS or your patching tool. Our guide to fixing SCCM scan failures with WSUS 503 errors covers keeping the update pipeline healthy.
- Follow the System Center Blog and Windows release health. This SCVMM HTTP 500 error was announced on the blog, not in the KB articles themselves.
- Document where you deployed KIR policies. Remove them once Microsoft ships the permanent fix and you have installed it, so the rollback does not linger.
October 2026 was a rough month for on-premises servers in general. If you also run Exchange or rely on Kerberos, check these related issues:
Read more: Exchange OWA Not Working After October 2026 Updates? Fix It Without Uninstalling
Read more: Kerberos RC4 Failures After Windows Updates? The Proven Fix
What causes the SCVMM HTTP 500 error after the October 2026 updates?
The SCVMM HTTP 500 error is caused by a change in the October 2026 Windows Server security updates (KB5126646, KB5126655 and KB5126651) that breaks BITS-based content transfer. VM template deployments that copy disks with BITS fail with HTTP 500 in SCVMM 2025, 2022 and 2019.
Do I need to uninstall KB5126655 to fix the VM template deployment?
No. Microsoft provides a Known Issue Rollback MSI for each Windows Server version. Install it on the hosts, the VMM server and the library server, set the policy to Disabled, run gpupdate /sync and restart. The security update stays installed.
Which machines need the Known Issue Rollback?
All affected Hyper-V hosts, the SCVMM management server and the SCVMM library server. Missing the library server is a common reason the VM template deployment fails even after the workaround.
Is there a permanent fix for the SCVMM HTTP 500 error?
Microsoft says a permanent fix will be delivered on top of SCVMM 2025 UR1 and SCVMM 2022 UR4. Update to those rollups now so you are ready to install it when it is released.
What is the AMD OverflowException issue?
It is a second known issue from the same October updates: on AMD-based hosts, host and cluster refresh fails with a UInt64-to-Int64 OverflowException. Microsoft provides hotfixes for SCVMM 2025 UR1 and 2022 UR4 that replace ImgLibEngine.dll on the VMM server.
References
Microsoft System Center Blog: Windows Server October 2026 monthly security updates impact SCVMM environments
Microsoft Learn: Use Group Policy to deploy a Known Issue Rollback
Microsoft Support: October 13, 2026 security update for Windows Server 2025 (KB5126646)
Microsoft Support: October 13, 2026 security update for Windows Server 2022 (KB5126655)
Microsoft Learn: Release notes for Virtual Machine Manager






